星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
Appendix I: Description and Solution of
Information Tips
1、 “Frame is up”
Reason: it is detected the presser box didn't put down before resetting, processing, collecting
file, and modifying file
Solution: click to put it down.
2、 “Please Reset!”
Solution: click .
3、 “Extern Link Error”
Reason: a. Machine head plate failure
b. Machine head plate interface is loose
Solution: a. Restart the machine
b. Power off and reinsert machine head plate interface
4、 “Prompt: Using Up Line!”
Reason: the bobbin threads required by preprocessing file is more than the remaining bobbin
threads (the total length in processing statistics interface - the initial length of bobbin threads)
Solution: a. Use the bobbin threads statistical functions, replace the bobbin threads and
modify the related length information;
b. If you don't use the bobbin threads statistical function, you can click to
close the bobbin threads statistical functions. See Section 2.2.5 and User Setting
section.
5、 “Prompt : Full Counting”
Reason: in statistical processing interface, when " Statistics Initial Value" increases to be
To Next Page
Loading...