星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
click button to save the changes and return to the edit file main interface.
In section offset, selecting lines and empty offset way effect is as shown below:
5.11 Section Speed Modification
In the edit file main interface, press the button to enter select stitch interface, as
shown in figure:
Press the Single Step or Continue key to move the cursor forward and backward to the
starting point of sewing speed modification, and press the key, mark with red cursor;
press the Single Step or Continue key to move the cursor forward and backward to the final
position of speed modification again, and press the key to enter the modify setting
interface, as shown in figure:
To Next Page
Loading...