星火全自动缝纫控制系统使用说明书
Operation Instruction for Xing Huo Automatic Sewing Control System
Auto Processing: Set up parameters needed by automatic processing.
Needle Starting Speed: Set the speed of the first several needles before starting up.
Speed Param: Set the running speed of spindle and XY axis.
Frame Setting: Set related parameters of pressure plate.
Winding Setting: Set the parameters of the winding work.
Speed Magnification: Set the processing speed proportion of spindle in specified section
in collection file.
Reset Setting: Set the parameters related to the origin.
Pause Setting: Set the parameters used in pause.
Stat. Setting: Set related parameters of statistical processing.
Method of Feeding: Set related parameters needed by feeding.
Broken Threads Detection: Set related parameters of broken threads detection.
Trimming Setting: Set related parameters of trimming.
Counting Setting: Set related parameters of the baseline statistics.
Init Power on: Set parameters needed by initialization in machine electrifying.
Other Settings: Set the parameters related to circulation processing and interface display.
Take Auto Processing for example, the interfaces are as follows:
To Next Page
Loading...