Jands Event 4 - Page 37

To Next Page

To Previous Page

Software Version 5.0

25/11/02 Draft Page 37

Time Sets the parameters that will use the memory fade times. Other

parameters will snap. See below for information on usage.

TimeCode Sets the MIDI (can also be used for SMPTE) timecode that will activate

this Memory – provided a MTC Stack is assigned to one of the Assign

faders.

Main Page

Default Chapter3
- Table of Contents3
1 Hardware Setup10
- Connecting Power10
- Connecting the Output to DMX Devices10
- Connecting Desklights10
- Connecting a Monitor10
- Connecting a Keyboard10
- Connecting a MIDI Device10
- Connecting a Slave Console10
- Turning the Power on10
2 Resetting the Console11
- To Reset the Console11
- To Load a New Software Version11
3 Operation Overview12
- Event Menus12
- Entering / Editing Menu Data12
- Entering Labels13
- Exit & Record Buttons13
4 Software Setup14
- Setting the Number of Fader Channels14
  - Setting the Physical Faders14
  - Setting Additional Virtual Faders14
5 Patching15
- Patching Faders15
- Storing Changes Made in Patch15
- Patching Fixtures16
- Patching Scrollers18
- Clearing the Patch18
6 Backup19
- Operation - Saving and Restoring a Show File19
7 Master Controls20
- Pr1 and Pr2 Faders20
- Add / solo Master Switch20
- Preset1 / Preset2 Master Switch20
- DBO Switch20
- Add / solo Fader21
- Grand Master (GM) Fader21
- Rate Control21
- Fixture Fader21
8 Manual Controls22
- Preset Faders22
  - Flash Buttons22
- Setting Fader Levels with the Keypad22
- The Programmer24
  - The Programmer LCD24
  - Position, Colour and Beam24
- Programmer Buttons26
- Palette Buttons26
9 Recording to Palette Buttons31
- Recording Position Palettes31
- Recording Colour Palettes31
- Recording Scroller Colour Palettes32
- Recording Beam Palettes32
- Recording Group Palettes33
10 Working with Memories34
- Recording a Memory34
- Record Button35
  - The Memory Menu36
  - Labelling a Memory38
- Masking38
- Crossfade Time38
- Editing a Memory40
- Clearing Memories41
  - The Clear Memory Menu42
- Copying a Memory42
11 Working with Chases43
- Recording a Chase - Using the Menu43
- The Chase Menu43
- Editing a Chase44
- Clearing Chases46
  - The Clear Chase Menu46
12 Pages48
- Page Make-Up48
- Loading a New Page48
  - Page Freeze49
  - Labelling a Page49
- Edit Page49
  - Changing the Make-Up of a Page49
  - Restoring the Factory Settings for Page50
13 Assign51
- Assigning a Memory or Chase51
- Assign a Stack51
- Special Feature - Assign Edit52
14 Files53
- Saving a File53
- Loading a File53
- Edit File54
15 Stacks55
- Control Fields55
- Setting a Stack to 2-Fader Operation55
16 Playback57
- Controlling Memories and Chases57
- Controlling Stacks58
  - Method 1: Using the Assign Stack Menu58
  - Method 2: Using the Stack Menu58
- Playback of a Stack59
- Clear Output from a Stack60
- Altering the Playback Order60
17 The Setup Menus61
- Setup Desk Submenu61
- The Setup Patch Submenu66
- The Setup Ctrl Submenu66
- The Setup Heat Submenu68
  - Setting Channels to Have a Background Intensity - Preheat68
- The Setup Rec Submenu - Record Options70
  - Setting the Default Record Options70
- The Setup Prefs Submenu71
- The Setup Backup Submenu72
18 Connecting an External Monitor73
- Operation73
20 Battery Replacement75
19 Service & Maintenance75
21 Appendix A - Pin Assignments76
- DMX Digital Output Sockets76
- MIDI In, Thru, out Sockets76
- Desklight Socket76
- Desk Link Cable76
- Power76
22 Appendix B - Glossary of Terms77
23 Index78

Jands Event 4 - Page 37

Table of Contents

Other manuals for Jands Event 4

Related product manuals