Software Version 5.0
25/11/02 Draft Page 53
14 Files
The previous section described how to assign Memories, Chases and Stacks to the
Assign faders. However, assigning items one at a time is slow and after you have set
up the faders for a particular song or part of the show you will want to save those
settings for easy recall later.
Files are just like Pages except that, while the make up of a Page is factory set, a File
can contain any combination of Memories, Chases and Stacks.
The steps involved in saving and loading Files are described below.
14.1 Saving a File
Ensure that the Assign Masters are loaded with Memories, Chases and Stacks as you
require.
Press the File button.
Use the keypad or + (On) / - (Off) buttons to enter a File number (0 - 24).
Use the arrow buttons to move the cursor to the Save field.
Press the + (On) button to save the file.
14.2 Loading a File
Press the File button.
Use the keypad or + (On) / - (Off) buttons to enter a File number (0 - 24).
Use the arrow buttons to move the cursor to the Load field.
Press the + (On) button.
The Assign Masters are loaded with the Memories, Chases and Stacks that were
previously saved in the File.
TIP: If Freeze is on, any Assign faders that were above zero % when the File
was changed will continue to control the old Memory / Chase until the faders are
returned to zero, at which time they will join the new File.
To Next Page
Loading...
Need help?
General
