Jands Event 4 User Manual

JANDS – Event 4 Version 5 Users Manual
Page 52 Revision 5.0.0.5 25/11/02
NOTE: This does not have to be the lowest number in the Stack, just the first
number you want to use.
13.3 Special Feature - Assign Edit
If you are used to working with theatrical consoles you may want to record Memories
using the menu system to enter Channel - Thru - At values. Event 4 allows this but
unless the Memory is already recorded you will not be able to put the memory on an
Assign fader and thus be able to see what you are doing.
To get around this problem it is possible to assign the edit output to a fader:
Press the Assign button followed by the Edit button.
Press the Flash button beneath the Assign Fader to be used to control the Edit output
Once the Flash button has been pressed, the Assign menu is closed and you will see
the Edit output has replaced whatever was previously controlled by the Assign Master.

Jands Event 4 Specifications

General

Brand	Jands
Model	Event 4
Category	Lighting Equipment
Language	English