Jands Event 4 - Restoring the Factory Settings for Page

JANDS – Event 4 Version 5 Users Manual
Page 50 Revision 5.0.0.5 25/11/02
NOTE: If the CHS: field is changed from AUTO to OFF, no Chases are loaded with
each Page.
12.3.2 Restoring the Factory Settings for Page
To restore the default settings for EDIT PAGE :
1. Press the Edit button.
2. Press the Page Button.
3. Move cursor to the Restore field.
4. Press the + (On) button to set the restore function "ON".
5. Press Exit to close the menu.