Jands Event 4 - The Clear Memory Menu; Copying a Memory

JANDS – Event 4 Version 5 Users Manual
Page 42 Revision 5.0.0.5 25/11/02
10.6.1 The Clear Memory Menu
Press Clear and open the Mem submenu. Its also possible to press Clear and then the
Mem button to open this menu:
Clear From: To: Confirm
M 10.00 M10.00 Off
From: Sets a first Memory number to clear.
To: Sets the last Memory number to clear.
Confirm Move the cursor to this field and press + (On) to clear the memory or
range of Memories.
10.7 Copying a Memory
1. Press the Copy button to open the Copy menu.
2. Move the cursor to the Mem field.
3. Press the + (On) button to open the Copy Memory menu.
4. Move the cursor to the From: field (the number of the memory to be copied).
5. Set the Memory number to be copied.
6. Move the cursor to the To: field (the number where the memory is to go).
7. Set the Memory number to be copied to.
8. Move the cursor to the Confirm field.
9. Press the + (On) button to copy the Memory.