Software Version 5.0
25/11/02 Draft Page 39
To change the time masking on a memory:
1. Press the Mem button.
2. Select the memory to be changed.
3. Move the cursor to the more field to reveal the Time field.
4. Set the parameters to use timing by pressing the + (On) once and then use the
arrow keys to move the cursor to each of the four Time options (IFCB). Press
the + (On) to toggle the option on or off.
Any letter shown indicates that parameter will follow the fade time. Eg. if the display
shows IF--, then when triggered, the intensity and position parameters will follow the
fade time, while the colour and beam will snap to the new value.
To Next Page
Loading...
Need help?
General
