Janome Skyline S9 - Page 106

104
q
e
q IP Address Settings (network settings)
Turn the DHCP option ON to use DHCP to assign an IP
address.
If you want to congure the network settings manually,
press the DHCP option OFF w, and press the Yes key e
for the Manual option.
The network settings window appears.
Press the arrow r of the item you would like to set,
choosing from IP Address, Subnet Mask or Default
Gateway.
Enter the setting by pressing the numeric keys that
appear under the settings.
Press the arrow again to assign the settings.
Press the OK key t to conrm the network settings.
Press X key y to cancel the settings.
u Sewing Machine Name Settings
Press Yes key i to open the sewing machine name
setting screen.
Enter the sewing machine name for the network
identication.
Press the OK key to change the name.
Press X to cancel the settings.
u
i
w
t
y
NOTE:
• You do not need to turn off the DHCP option and
congure the network settings manually unless you
know the appropriate IP address, Subnet Mask
and Default Gateway for this machine.
• When DHCP option of your machine is turned ON,
turn on the DHCP option of your wireless router as
well.
o Default key
Press Default key o to reset the Wi-Fi settings (factory
settings).
r
o
r Manual method
Press “Manual” r. Enter the network name you would
like to connect with. Press the OK key.
If the selected wireless network requires an encryption
key for connection, the Encryption Key Entry dialog box
appears.
Enter the encryption key and press the OK key to
establish the network.
r