155
!4 Locking stitch ON/OFF (after each color change)
The threads may ravel if the stitch data does not contain
locking stitches at the beginning of each color section.
To avoid raveling, insert locking stitches at the beginning
when this function is turned ON.
!5 Locking stitch ON/OFF (after thread trimming)
If you turn ON the thread cutting (refer to the previous
page “Thread cutting”), the machine will insert locking
stitches after the jump to avoid threads from raveling.
Press the next page key to go to the next menu.
NOTE:
You do not need to change Locking stitch function
settings when using built-in embroidery designs.
!4
!5
!6
!6
-1
!6 Thread selection
There are 9 types of embroidery thread to choose from.
Press the key of the thread you wish to use. The color
code of the selected brand is shown on the color/part key
along with the name of the color.
If you use imported embroidery stitch data containing
proper thread information, press the retain original color
key to retain this information.
!6-1 Retain original color key
Press the next page key to go to the next menu.
To Next Page
Loading...
