- 78 - Orion - 324501H
FR
DEEN
7.2- Transmitter identity code programming
Transmitter and receiver are linked by a radio channel and an identity code.
During the «association» programming procedure, one or several relays of the
receiver(s) are going «to learn» the identity code of one or several transmitters.
This identity code is programmed on the transmitter, it is freely chosen by the
user to personalize its installation :
ORET, OREi et OREL : 256 possible codes
OREV : 4096 possible codes (see next section)
The ORE transmitter is equipped with a 8 cursors 2 states DIP switch («ON»
or «OFF») to program the identity code.
By default (in the delivery) the transmitter identity code is :
ON - ON - ON - ON - ON - ON - ON - ON
(11111111 binary = 255 decimal)
ON
ON (1)
OFF (0)
12345678
ORET
OREi
OREV
= cursor
OREL
We strongly recommend that you change this code to
ensure the uniqueness of your installation and avoid any
unintentional commands from another system which may
already be installed.
DRAFT a
To Next Page
Loading...
Need help?
General
