EasyManuals Logo

JD 4100Z3 User Manual

Default Icon
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
4948
SELF-TIMER - CONT'D
88
Press the shutter-release button all-the-way down to start
timer.
• While the self-timer is functioning, the self-timer lamp on the front of the cam-
era blinks. As the time to take the picture is closer, the lamp blinks faster.
And just before taking the picture, the lamp lights up to show the time to take
a shot.
• The beep sounds at the time when the lamp blinks. (The beep can be can-
celed with the menu in the SETUP mode.)
• When the subject is not in the center of the frame, use the focus lock function.
(See page 37.)
• After taking the self-timer shot, the single-shot mode returns.
* Do not press the shutter-release button when standing in front of the camera. The camera cannot
adjust the focus.
* To interrupt the self-timer shot, rotate the function dial to , PC or SETUP.
55
Press the MENU button.
• The self-timer shot icon appears on the upper right side of the LCD moni-
tor.
66
Determine the image composition while looking into LCD
monitor or viewfinder and adjust the image rang and size
with the or key.
• When the key is pressed, the image size becomes large (Telephoto
mode). When the key is pressed, the image range becomes wide
(Wide-angle mode).
77
Press the shutter-release button part-way down.
SELF-TIMER - CONT'D
44
Press the key toback the previous display.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JD 4100Z3 and is the answer not in the manual?

JD 4100Z3 Specifications

General IconGeneral
BrandJD
Model4100Z3
CategoryDigital Camera
LanguageEnglish