EasyManuals Logo

JD 4100Z3 User Manual

Default Icon
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #75 background imageLoading...
Page #75 background image
149
148
NOTES ON THE HANDLING - CONT'D
Operating Temperatures and Conditions
• This camera has been designed for use in temperatures from 0ºC to 40ºC (32ºF to 104ºF).
• Never leave the camera exposed to extreme high temperatures, such as in a car parked in the sun, or to
extreme humidity.
• To prevent condensation from forming, place the camera in a sealed, plastic bag when bringing it from a
cold place to a warm place. Allow it to come to room temperature before removing it from the bag.
Safety and Handling for the CF card
• Read and follow the instructions manual supplied with the CF card.
• The following may cause data loss or damage. We have no responsibility for it. We recommend you to
copy a backup data in other media such as ZIP disc, hard disk, CD-ROM, etc.
1 Improper use of card.
2 Static electrical discharge near card or electric noise.
3 Removing the card or interrupting power supply while camera or equipment is accessing the caed ( read-
ing, writing, formatting etc. )
4 Non-use of card for an extended period.
5 Using the card over its life.
• When the card is formatted, the recorded data is deleted. Be sure to record a backup data if it is necessary.
• The storage capability of the CF card will diminish with extended use. In this case, buy a new card.
• Keep away from static electricity and electric noise.
• Do not bend, drop, or subject the card to impact.
• The strong static electricity or shock may damage the card so that recording or writing in the card cannot
be performed. In this case, buy a new card.
• Do not touch the electrical contacts of the card with your fingers or a metal object.
• Keep away from heat, moisture, and direct sunlight.
• Keep away from small children.
• When not in use, return the card to its protective case.
NOTES ON THE HANDLING - CONT'D
LCD Monitor Care
• The LCD monitor is manufactured using high precision technology. However, there may rarely be a
lack of color or bright points on the LCD monitor.
Do not apply pressure on the surface of the LCD monitor. Permanent damage may occur.
In a cold environment, the LCD monitor may be temporarily dark. When the camera warms up, nor-
mal display will be restored.
• The LCD monitor may be slow to react in a low temperature or may be dark in a hot environment.
When the camera warms up, normal display will be restored.
• If there are fingerprints on the LCD monitor surface, gently wipe it with a soft, clean, dry cloth.
Copyright
TV program, films, video tapes, and other materials may be copy righted.
Unauthorized recording of such materials may be contrary to the provision of the copyright laws.
And in some performance and exhibition, etc. taking picture are prohibited. The image which has a
copyright cannot be used except for the use within the copyright laws.
DPOF
If the CF card including the DPOF data specified by other camera is set in this camera, the DPOF
data will be cancelled.
• Even if you insert the CF card including the data recorded with other digital camera supporting the
DCF format, the DPOF data for the images captured with other digital camera ( the images in the
folder made by other digital camera supporting the DCF format ) cannot be specified in this camera.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the JD 4100Z3 and is the answer not in the manual?

JD 4100Z3 Specifications

General IconGeneral
BrandJD
Model4100Z3
CategoryDigital Camera
LanguageEnglish