Johnson Controls (H,Y,C)IDM012B21S User Manual

OUTDOOR UNITS
2-110
TC-15001-rev.3
 'U\2SHUDWLRQ
Power to
I.U.: ON
Press
TEMP. Switch
Power to
I.U. PCB: ON
only for Indoor Unit
with Auto-Louver
Auto - louver
0 Reset
Start of Transmitting between
I.U. and O.U.
Start of Transmitting between
I.U. and Remote Control Switch
ON
(Lower than Activation Level)
OFF
(Higher than Activation Level)
Set
Operation Mode
at “DRY”.
I.U.: Indoor Unit
O.U.: Outdoor Unit
MD Operation: ON
DRY Indication
Indication of Set Temp.
Switch: Increasing Set Temp.
Switch: Decreasing Set Temp.
Float Switch
Press
RUN/STOP
Switch
to 2
PID Control for I.U.
Electric Expansion Valve
Higher than
Set Temp.
(Thermo-ON)
Lower than
Set Temp.
(Thermo-OFF)
I.U. Air
Intake
Temp.
Outdoor
Temp.
DRY Operation
3 min.
Yes
No
RUN indicator lights.
MIF Operation at Low Fan Speed
MIF Operation at SLo Fan Speed
MIF Operation at Low Fan Speed
for Unit with Condensate Pump
≤ -14°F
(-10°C)
> -14°F
(-10°C)

Johnson Controls (H,Y,C)IDM012B21S Specifications

General

Brand	Johnson Controls
Model	(H, Y, C)IDM012B21S
Category	Air Conditioner
Language	English