CONTROL SYSTEM
TC-15001-rev.3
6-111
6.9.10.6 Daylight Saving Time Setting
After the Date/Time function is set, the screen will
be displayed as shown on the right.
Set each time and touch “Done” in the lower right
corner.
6.9.10.7 Group Register
5HJLVWHUWKHLQGRRUXQLWVFRQ¿UPHGIRUFRQQHFWLRQ
to the group (block) of the large central controller.
Touch “Set” on the touchscreen and the Settings
Screen is displayed (when the power supply is
WXUQHG21IRUWKH¿UVWWLPH
Refer to Section 6.9.11.3 for details.
“Done” Button