IFC-3030 Programming Manual — P/N 52025:C 08/05/2005 57
Delete Program Program
Soft Keys
CLEAR ALL PROGRAMMING: Press to remove all panel, panel module, loop, point and ACS
programming information, as well as logic and trouble zone equations. Pressing this key removes
everything except passwords. A confirmation screen will display asking the user to confirm the
deletion command. Pressing this key causes a reboot.
CLEAR:PANEL Press to remove all programmed panel setting information from control panel
memory. This does not remove ACS programming. A confirmation screen will display asking the
user to confirm the deletion command. Pressing this key causes a reboot.
CLEAR:PANEL MODULES Press to remove all panel module programming information. A
confirmation screen will display asking the user to confirm the deletion command. Pressing this
key causes a reboot.
CLEAR LOOPS Press to scroll through the options: ALL, LOOP 1, LOOP 2,...., LOOP 10. Stop at
the desired option. Press ACCEPT to delete all loop programming for the selected option. Pressing
this key causes a reboot.
DELETE POINT To delete a point, press this soft key to display the Delete Point screen. Pressing
this key may cause a reboot.
CLEAR ACS: Press to remove all ACS programming from panel memory. A confirmation screen
will display asking the user to confirm the deletion command. Pressing this key causes a reboot.
ACCEPT: Press to clear all programming for the selected loop option for CLEAR LOOPS. A
confirmation screen will display asking the user to confirm the deletion command.
Figure 3.47 Delete Point Screen
POINT SELECT: Press to scroll through the options: detector, module, or panel module. Stop at
the desired option. Press the DELETE soft key to delete the point from programming. A
confirmation screen will display asking the user to confirm the deletion command.
NOTE: Deleting points that are active or in trouble will cause a reboot.
NEXT/PREVIOUS SELECTION Press to scroll sequentially to the next or previous point.
DELETE POINT
POINT SELECT:
LyyDzzz (DETECTOR)
NEXT SELECTION DELETE
PREVIOUS SELECTION BACK