IFC-3030 Programming Manual — P/N 52025:C 08/05/2005 65
Section 4: Alter Status
Alter Status provides a programming level for changing operating parameters such as detector
sensitivity, Walk Test, changing system time/date and disabling/enabling points. Alter Status is
accessible with the Master Password and with User Passwords programmed for Alter Status.
Figure 4.1 Alter Status Screen
Soft Keys
All soft key selections (except BACK) are menu selections. Press to display the desired menu.
4.1 Disable/Enable Point Selection
.
Figure 4.2 Point Select for Disable/Enable Screen
LAKEVIEW GENERAL HOSPITAL
SYSTEM NORMAL
10:22:34A FRI SEP 24, 2004
ALTER STATUS
DISABLE/ENABLE WALK TEST
DETECTOR SENSITIVITY CHANGE TIME/DATE
CLEAR VERIFY COUNTS CONTROL ON/OFF
CLEAR HISTORY BACK
LAKEVIEW GENERAL HOSPITAL
SYSTEM NORMAL
10:22:34A TUE AUG 24, 2004
POINT SELECT
POINT SELECT:
LyyDzzz
(DETECTOR)
NEXT SELECTION ACCEPT
PREVIOUS SELECTION BACK
To Next Page
Loading...
Need help?
General
