IFC-3030 Programming Manual — P/N 52025:C 08/05/2005 75
Program Time/Date Alter Status
Advanced Walk Test In Progress Screen
Figure 4.13 Advanced Walk Test In Progress Screen.
4.7 Program Time/Date
Figure 4.14 Program Time and Date Screen
Soft Keys
TIME/DATE: Press to bring the cursor to the time/date field. The current time and date will be
displayed using the current format. Change the values using the keypad.
TIME FORMAT: Press to scroll through a list of formats as follows; HH:MM AM/PM; H:MM
AM/PM; HH:MM; and H:MM. Stop at the desired format.
DATE FORMAT: Press to toggle between MM/DD/YY and DD/MM/YY formats. Stop at the
desired format.
TIME ZONE: Press to scroll through a list of 34 time zone selections. Stop at the appropriate zone.
TROUBLE
PROG MODE ACTIVATED
10:22:34A FRI SEP 24, 2004
WALK TEST IN PROGRESS
SETTINGS: ADVANCED, AUDIBLE, PANEL
NEXT TEST ABORT
Once the START TEST soft key has
been pressed and the test begun,
the message changes to ABORT
Once the START TEST soft key has
been pressed, this soft key appears.
LAKEVIEW GENERAL HOSPITAL
SYSTEM NORMAL
8:22:39A FRI SEP 24, 2004
PROGRAM TIME AND DATE
TIME/DATE: 08:22A TUE 1/01/03
TIME FORMAT: H:MM AM/PM
DATE FORMAT: MM/DD/YY ACCEPT
TIME ZONE: USA EASTERN
BACK
To Next Page
Loading...
Need help?
General
