IFC-3030 Programming Manual — P/N 52025:C 08/05/2005 77
Control On/Off Point Select Alter Status
Figure 4.16 Control Off Screen
Soft Keys
FORCE OFF: Press this soft key to change the state of the control module from
AUTOMATIC
ACTIVE to AUTOMATIC INACTIVE.
A module with a releasing Type ID cannot be forced.
4.8.2 Control On
If the selected point is inactive, the Control On screen will appear
Figure 4.17 Control On Screen
Soft Keys
FORCE ON: Press this soft key to change the state of the control module from
AUTOMATIC
INACTIVE to AUTOMATIC ACTIVE.
LAKEVIEW GENERAL HOSPITAL
SYSTEM NORMAL
10:22:34A FRI SEP 24, 2004
CONTROL ON/OFF: L03M052
AUTOMATIC ACTIVE
ELEVATOR RECALL EAST WING
FIFTH FLOOR Z000 CONTROL
FORCE OFF BACK
LAKEVIEW GENERAL HOSPITAL
SYSTEM NORMAL
10:22:34A FRI SEP 24, 2004
CONTROL ON/OFF: L03M052
AUTOMATIC INACTIVE
ELEVATOR RECALL EAST WING
FIFTH FLOOR Z000 CONTROL
FORCE ON
BACK
To Next Page
Loading...
