JR Vibe 90SG - Ccpm Levers Installation

17
2-6 CCPM LEVERS INSTALLATION
140 CCPM
Install the CCPM
Levers as necessary
for 120 or 140 CCPM
depending on the
type you will use.
Socket Head Bolt, 3 x 30mm (2pcs)
T-Arm L
T-Arm R
Nylon Lock Nut, 3mm (2pcs)
Elevator Arm
Setscrew, 4 x 4mm (4pcs)
Nylon Lock Nut, 4mm
A-Arm Base Spindle
Lever Spacer 140 CCPM (2pcs)
Lever Spacer 120 CCPM
Nylon Lock Nut,
3mm (2pcs)
Setscrew, 4 x 4mm (4pcs)
T-Arm L
Elevator Arm
120 CCPM Pivot Pin (2pcs)
Setscrew, 4 x 4mm (4pcs)
Nylon Lock Nut, 4mm (1pc)
Socket Head Bolt, 3 x 30mm (2pcs)
Lever Spacer 120 CCPM (1pc)
Lever Spacer 140 CCPM (2pcs)
120 CCPM
deR
)4x(
deR
)4x(
Nylon Lock Nut, 3mm (2pcs)
90°
T-Arm R
Fasten with the Nylon
Lock Nut 3mm rst
and then fasten with
Setscrew 4x4mm
for T-Arm R.
Make sure that the elevator control arm is
installedsothatitis90°totheA-armbase.
Use the locating hole in the main frame to
helpachievethe90°position.Securesothat
the Setscrew 4 x 4mm is engaged in the
D-shaped recess.