JR Vibe 90SG - Mixing Arm Installation

30
Socket Head Bolt, 3 x 12mm (4pcs)
)2x( deR
4-2 MIXING ARM INSTALLATION
Steel Joint Ball (4pcs)
Socket Head Bolt, 3 x 12mm (4pcs)
Socket Head Bolt, 3 x 6mm (2pcs)
Flat Head Screw, 2 x 8mm (4pc)
Washer, 3 x 4.5 x 1mm (2pcs)
The position of Joint Ball
Socket Head Bolt,
3 x 6mm (2pcs)
Note the proper direction
of the Mixing Arm.
Steel Joint Ball (4pcs)
Flat Head Screw, 2 x 8mm (4pcs)
Pitch Arm (2pcs)
Mixing Arm (2pcs)
Washer,
3 x 4.5 x 1mm (2pcs)
Main Blade Holder (2pcs)
deR
)2x(
deR
)4x(
deR
)2x(
Optional Note: For increased cyclic
response,movethesteeljointball
mounting positions as shown.