Bottom Frame Plate
Landing Skid (2pcs)
Landing Skid Cap (4pcs)
Setscrew, 4 x 4mm (4pcs)
AC
)4x(
2-12 LA ND I NG G E A R INST A LL A T I ON
Socket Head Bolt, 3 x 8mm (6pcs)
Landing Skid Cap (4pcs)
Flat Washer, 3mm (8pcs)
Nylon Lock Nut, 3mm (4pcs)
Setscrew, 4 x 4mm (4pcs)
Socket Head Bolt, 3 x 20mm (4pcs)
Socket Head Bolt, 3 x 20mm (4pcs)
Flat Washer, 3mm (8pcs)
Landing Strut (2pcs)
Socket Head Bolt, 3 x 8mm (6pcs)
Nylon Lock Nut, 3mm (4pcs)
deR
(x6)
Optional Note: The ends of the
landing skid can be trimmed up
to 1
1
/
2
in (38.5mm) as desired
to shorten them for looks. Use
caution not to cut the skids too
short: measure prior to cutting
to verify proper length.
To Next Page
Loading...
