JR Vibe 90SG - Elevator A-Arm Assembly; Double Main Drive Gear Assembly

9
Universal Ball Link
Elevator A-Arm
A-Arm Bearing Collar (2pcs)
A-Arm Base
Complete Assembly
Socket Head Bolt,
2.3 x 15 mm
3 x 8mm (2pcs)
15
16 DOUBLE MAIN DRIVE GEAR ASSEMBLY
Socket Head Bolt, 2.3 x 15mm (1pc)
A-Arm Bearing Collar (2pcs)
Socket Head Bolt, 3 x 8mm (2pcs)
Socket Head Bolt,
deR
(x2)
ELEVATOR A-ARM ASSEMBLY
Complete Assembly
Flat Head Bolt, 3 x 6mm (4pcs)
Socket Head Bolt, 3 x 8mm (5pcs)
Tighten the bolts for the main
drive gear and the tail drive gear
equally to prevent warping.
Washer, 15 x 21 x 0.5mm
Socket Head Bolt,
Main Drive Gear T96
Autorotation Assembly
Flat Head Bolt, 3 x 6mm (4pcs)
Tail Drive Gear T86
Tail Drive Gear Hub
Autorotation Shaft
deR
)5x(
Flat Washer, 3mm (5pcs)
Washer, 15 x 21 x 0.5mm (1pc)
Flat Washer, 3mm (5pcs)
3 x 8mm (5pcs)
deR
(x4)
Note: Use a hobby knife to trim
JR PROPO raised text to allow ease of
assemblyintotheElevatorA-Arm
Applylightgreasetoautorotation
shaft and 15 x 21 large washer