4-31 Chapter 4 Conning Display
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
付録
Sentence from the water depth sounder
An alert setting point value is updated by the sentence from the water depth sounder.
A sentence is output at every 4 hours from 0 hour of UTC after the power supply of the depth sounder
is turned on.
The contents of sentences are listed below.
Field Code Data Specification
1 $ Header Fixed
2 PJRCM Sentence ID
3 SD Equipment ID
4 88 System information command
5 VXX.XX Software version
6 X Image transmission
7 X Crack
8 X Interference prevention
9 X GAIN AUTO/NORMAL
10 X RANGE
11 ±XX Draft adjustment value
12 X Cursor display ON/OFF
13 X Key ACK
14 X Relay contact point
15 XX Water depth alarm ON/OFF OFF=0, ON=1
16 XX.X Water depth alarm setting value 0.0 ~ 99.9
17 X System alarm ON/OFF lost
18 X System alarm ON/OFF
transmission
19 X System alarm ON/OFF reception
20 X System alarm ON/OFF foam
forming
21 X System alarm ON/OFF printer
22 X Recording interval
23 *hh Check sum
24 <CR><LF> Delimiter
To Next Page
Loading...
