Chapter 4 Conning Display 4-30
Item Display contents
Sensor
information
Displays the water depth sensor source.
FWD: Depth sounder installed at the front of the ship
MID: Depth sounder installed at the center of the ship
AFT: Depth sounder installed at the rear of the ship
Alert setting point The water depth value measured from the bottom of the keel is displayed.
The unit can be changed in the View menu.
For the details, refer to "5.1.2 Setting up the display of unit of setting value".
*When the water depth value measured from the bottom of the keel is not
received, the [Non SYNC] badge is displayed.
To Next Page
Loading...
