JRC JCY-1800 - Example5 in Case of Connecting with Client PC and VDR if

Chapter9 Appendix
VDR/S-VDR Real Time Monitor / Installation Manual
98
9.2.5 Example5
In case of connecting with Client PC and Radar IF
Server and Client PC already is assigned different IP address (192.168.20.xxx) from default
value, and explains how to set when Server PC is connected to Client 1, Client 2, Client3 PC and
Radar IF.
Note
Radar IF (NWP-46)
In the VDR/S-VDR equipment main Radar image is captured
and recorded, and it is possible to capture or record images of
sub Radar and ECDIS by the Radar IF in the VDR/S-VDR Real
Time Monitor.