Chapter9 Appendix
VDR Real Time Monitor / Installation Manual
63
9.2 Example of connection
Shows how to set according to example of connection.
User LAN
Connection
IP address assignment of Server
and Client PC
Example of Connection VDR IF
Connection
Setup cable
for VDR IF
Note
Example1
In case of only one VDR/S-VDR Real Time Monitor
－
Example 2
In case of connecting with Client PC
－
－ In case of
designing
network by
separating
from user LAN
In case of registering default IP
address to PC
Example 3
In case of connecting with Client PC and Radar IF
Connect －
Example 4
In case of connecting with Client PC
－ － In case of registration by adding
default IP address to PC
Example 5
In case of connecting with Client PC and Radar IF
Connect －
If the IP address automatically
is assigned by DHCP in the
user LAN, cancel the DHCP.
And register an unused fix IP
address in the user LAN and
add above IP address.
Example 6
In case of connecting with Client PC
－ －
In case of
designing
network by
connecting
with user LAN
In case of registration by changing
default IP address to PC
Example 7
In case of connecting with Client PC and Radar IF
Connect Use
If IP address assignments are
changed, please feed back the
information to Mitaka.
If IP address assignment is changed, it is necessary to change the
script file of VDR IF.
Please get the setup cable by the following code number, and set up
the VDR IF.
Code No. (VDR IF setup cable)：5ZCGF00017
Note
To Next Page
Loading...
