JRC JCY-1800 - Set IP Address

Chapter9 Appendix
VDR Real Time Monitor / Installation Manual
67
STEP 2 Set IP Address
Open the properties screen of Internet protocol (TCP/IP) in the Windows control panel, and set
the following IP address to the VDR/S-VDR Real Time Monitor PC.
・IP Address =192.168.0.251
・Subnet Mask =255.255.255.0
It is not necessary to set Default gateway for the VDR/S-VDR Real Time Monitor.
And then set the VDR/S-VDR Real Time Monitor PC in accordance with the “6.2 Setup Items of
PC”.
STEP 3 Install the VDR/S-VDR Real Time Monitor software
Install the VDR/S-VDR Real Time Monitor software with the install CD.
When the Server/Client selection screen displayed, please select Server.
IP Address
/Subnet Mask