EasyManua.ls Logo

JRC JCY-1800 - Check the IP Address of the Option PC and VDR WAN

JRC JCY-1800
156 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter5 Setup VDR/S-VDR by Maintenance software
VDR/S-VDR Real Time Monitor / Installation Manual
17
(5) Check the IP Address of the Option PC and VDR WAN.
VDR WAN IP Address of VDR LAN port for connecting the Option PC
Option PC Destination IP Address of real time data
If the IP Address is changed, click the [Edit] button, and change it in the Network screen.
Default to
VDR or S-VDR WAN = 192.168.0.254
Option PC =192.168.0.251
Above is assigned.
In case of VDR, Network screen
In case of S-VDR, Network screen
Note
If input is mistaken, the IP Addresses become initial value by the
[Default] button.
Note
If the [Set] button is clicked, the VDR/S-VDR is rebooted
automatically to validate the input IP Address.

Table of Contents

Other manuals for JRC JCY-1800

Related product manuals