JRC JCY-1800 - In Case of JCY-1850 S-VDR

Chapter4 Wiring
VDR/S-VDR Real Time Monitor / Installation Manual
12
4.2 In case of JCY-1850 S-VDR
Open the door of S-VDR, and connect LAN cables as following.
Maintenance PC:
Connect LAN cable to “VDR-LAN” (Not used port) of MCB.
VDR/S-VDR Real Time Monitor PC:
Connect LAN cable to “JRC-LAN” port of MCB.
VDR/S-VDR
Real Time Monitor PC：
JRC－LAN へ
Maintenance PC:
VDR－LAN へ