Chapter5 Setup VDR/S-VDR by Maintenance software
VDR/S-VDR Real Time Monitor / Installation Manual
15
Chapter5 Setup VDR/S-VDR by Maintenance software
It is necessary to set real time output setup to VDR/S-VDR by Maintenance software.
The setup way is shown in this chapter.
(1)Click the”JCY1800 Maintenance” icon, and start the maintenance software.
(2)Select “VDR” or “S-VDR” in the Setup Equipment block of Login screen, and log in the software.
In case of JCY-1800: Select VDR
In case of JCY-1850: Select S-VDR
Select VDR or S-VDR.
To Next Page
Loading...
