Chapter4 Wiring
VDR/S-VDR Real Time Monitor / Installation Manual
14
RCU upside is recommended as installation place.
To wire AC power cable of the VDR IF, secure 7cm for back space of the VDR IF, and fix it.
【Note】
If the VDR IF is fixed as the following figure, backs space of the VDR IF will be secured 7cm.
In order to fix the VDR IF, please use the attached magic tape in the VDR IF kit.
Magic Tape
In case of reassignment of IP address, in order to correct the
VDR IF setup, please get the VDR IF setting cable by following
code, and set up the VDR IF.
VDR IF Setting Cable：5ZCGF00017
Note
To Next Page
Loading...
