JRC JCY-1800 - PC Specification; Setup Items of PC; Set the IP Address; Chapter6 PC (Server;Client) Setup

Chapter6 PC (Server/Client) Setup
VDR/S-VDR Real Time Monitor / Installation Manual
19
Chapter6 PC (Server/Client) Setup
6.1 PC Specification
Confirm that the specification of an installed PC is the following performance equivalent model.
OS : Windows XP Professional or Home Edition
CPU : Pentium M Processor 730 Clock=1.6GHz
RAM : 512MB
HDD : 40GB
Resolution : 1024×1024 dots (More than XGA)
CD drive : CD-ROM
Card drive : PCMCIA TypeⅡ or CF Card drive
Network : 10BASE-T/100BASE-TX Ethernet
6.2 Setup Items of PC
In order to prevent sending unnecessary packets to the network that includes the VDR/S-VDR
from the VDR/S-VDR Real Time Monitor PC, set the following items to a PC.
And also set the IP address to the PC.
・ Set the IP address
・ Stop automatic synchronization with an Internet time server
・ Stop the Remote Assistance
・ Stop the Automatic Updates
・ Stop the Error Reporting
・ Invalidate the Windows Firewall
・ Set the Power Options
6.2.1 Set the IP address
Set the IP address to the installed PC.
Shows the assignment of the IP addresses in Table 6.2-1.
Table 6.2-1 IP address
Mode IP Address Subnet Mask Default Gateway
Server
※
1
192.168.0.251
※
1
255.255.255.0 Unnecessary
Client1
192.168.0.250
※
1
255.255.255.0 Unnecessary
Client2
192.168.0.249
※
1
255.255.255.0 Unnecessary
Client3
192.168.0.248
※
1
255.255.255.0 Unnecessary
※1：Even if IP Address already is assigned to Server PC and Client PC by user LAN,
please add to registration of the above IP Address.
If the IP address automatically is assigned by DHCP in the user LAN, cancel the
DHCP. And register an unused fix IP address in the user LAN and add above IP
address.
Refer to "9.2 Example of connection" for more detail.