JRC JCY-1800 - Sensor Connection Setup

Chapter4 Wiring
VDR/S-VDR Real Time Monitor / Installation Manual
11
Chapter 4 Wiring
4.1 In case of JCY-1800 VDR
Open the door of VDR, and connect LAN cables as following.
Maintenance PC:
Connect LAN cable to “VDR-LAN” (Not used port) of MCB.
VDR/S-VDR Real Time Monitor PC:
Connect LAN cable to “EXT-LAN” port of RMB.
VDR/S-VDR
Real Time Monitor PC：
EXT－LAN へ
Maintenance PC:
VDR－LAN へ