Chapter6 PC (Server/Client) Setup
VDR/S-VDR Real Time Monitor / Installation Manual
55
(7) Set the inputted contents
In case of Server PC）
Click the [All Set] button to setup.
The initial setup for Server PC is completion.
If the Clients are connected, please continue the initial setup for Client PC in a monitor
terminal.
In case of Client PC)
Click the [All Set] button to setup.
(8) When setup is completion after clicking the [All Set] button, click the [Close] button to
close the Setup software.
Note
When the [All Set] button is clicked, folder composition and system
files in the selected folder for record and playback are checked.
By the result, when it is necessary to initialize, the following screen
is indicated. Click the [OK] button to close the screen, and then click
the [Initialize] button which is in the Setup Folder block of the
System tab to initialize the folder.
About Keel – Trans
It means distance from keel to transducer as the following figure.
Echo sounder outs depth under transducer, so that depth under
keel can be indicated always by registration the distance.
Note
To Next Page
Loading...
