Chapter9 Appendix
VDR Real Time Monitor / Installation Manual
123
9.2.7 Example7
In case of connecting with Client PC and Radar IF
Server and Client PC already is assigned different IP address (192.168.0.xxx) from default value,
and explains how to set when Server PC is connected to Client 1, Client 2 , Client3 PC and
Radar IF.
VDR/S-VDR Real Time Monitor & Onboard LAN (Example) INTERCONNECTION DIAGRAM
VDR IF(Router)
VDR/S-VDR
Real Time Monitor
Server PC (*2)
VDR/S-VDR
Real Time Monitor
Client PC1 (*2)
VDR/S-VDR
Real Time Monitor
Client PC2 (*2)
VDR/S-VDR
Real Time Monitor
Client PC3 (*2)
On Board LAN System (Example)
AC
LAN
LAN
LAN
JCY-1800/1850
VDR/S-VDR
EXT-LAN *3
*1 Ethernet cable
(Shield Twist-Pair cable)
Max. 30m
NOTE
1. *1 Shielded LAN Cable(Cat5) : Dock Yard supply
2. *2 PC : Owner supply
3. *3 JCY-1800 : EXT-LAN
JCY-1850 : JRC-LAN
LAN
RJ-45
NWP-46
Radar IF
LAN
HUB
WAN
LAN
192.168.0.254
192.168.111.100
192.168.0.100
192.168.111.152
192.168.0.11
192.168.0.12
192.168.0.13
192.168.0.10
Note
Radar IF (NWP-46)
In the VDR/S-VDR equipment main Radar image is captured
and recorded, and it is possible to capture or record images of
sub Radar, ECDIS and Conning by the Radar IF in the
VDR/S-VDR Real Time Monitor.
To Next Page
Loading...
