Chapter9 Appendix
VDR/S-VDR Real Time Monitor / Installation Manual
142
9.3 Hyper Terminal Setup
9.3.1 Starting
(1) Select from a [start] button in order of "All Programs" => "Accessories" =>
"Communications" => "Hyper Terminal."
(2) Enter a name for the connection, and click the [OK] button.
Here, "VDR_IF" is inputted as an example.
(3) Select a COM port which connects with the VDR IF, and click the [OK] button.
(4) Set the “Bits per second” as 9600, and click the [OK] button.
(Please leave to a default value except the "bits per second.")
To Next Page
Loading...
