104
7.15. Buttonhole stitches
* The buttonhole length is automatically determined only by
placing a button on the buttonhole presser foot.
* The machine can sew buttonholes for buttons with diameters
of 0.7 - 3.2 cm.
* In case of stretchy fabrics, use non-elastic interlining on the
wrong side of the fabric.
* Make sure to perform test sewing to see that the machine
sews buttonholes correctly.
* Buttonhole Nos. 414 - 417 are for knit fabrics and should be
used with a knit needle.
No. Pattern Application
401
Standard buttonhole
Buttonhole for medium to heavy
weight materials
Standard buttonhole
402
Manual 2-step buttonhole
Use this buttonhole, when there
is an overlapped section in the
fabric or when you want to sew
larger buttonhole than 3.2 cm
diameter. (Refer to page 110)
403
Manual 2-step buttonhole
(Memory)
* It is possible to store the size of
buttonhole you have sewn once in
memory.
404
Buttonhole for heavy weight
materials
Stitch density is coarse. This
pattern is used for coats, etc.
405
Sews buttonhole double
406
Decorative
Decorative buttonholes
407
Rounded end
Buttonholes for women’s blouses
and children’s clothes.
Also for light weight materials
408
409
Presser foot
Buttonhole presser foot (E)
No. Pattern Application
410
Keyhole
Keyhole buttonhole for heavy
weight materials such as suits,
jackets, coats, etc.
411
Round keyhole
412
Large and thick keyholes for
heavy weight materials
413
For sewing buttons on the front
plackets of pants, etc.
414
For knit
Buttonhole for light weight knit
(also used as decorative button-
hole)
415
Buttonhole for medium weight
knit (also used as decorative
buttonhole)
416
Buttonhole for light weight knit
Sews buttonhole double
417
Buttonhole for medium weight
knit
Sews double buttonhole
418
Decorative
Decorative buttonholes
Decorative buttonhole which look
like hand-sewn
419
420
421
Basting stitch for buttonholing
(Refer to page
109
)
Leave the machine in
Lock mode
To Next Page
Loading...
Need help?
General
