27
4.10. Bobbin thread preparation
1
Place the thread spool to the spool pin.
There are three types of the spool caps
A
, large, me-
dium and small.
Select the size of spool cap according to the thread
spool to be used and use it while changing its direction
appropriately.
* Be aware that a spool with a small remaining
amount of thread can cause tangling or slip-off
of thread.
A
A
Thread the guide
❶
.
2
Thread the thread guide
❷
(guide in the
circle) .
Pull the thread by both hands and thread
it to bobbin winding thread guide.
3
■
Winding a bobbin
❶
❷
●
In the case of using the spool pin
●
In the case of using the auxiliary spool pin
2
Place the thread spool to the auxiliary
spool pin.
Pass the thread through thread guide
❶
. Then, pass the thread through thread
guide for bobbin winding
❷
.
Pull the thread by both hands and thread
it to bobbin winding thread guide.
3
1
Place the auxiliary spool pin.
❷
❶
Turn off the machine
To Next Page
Loading...
