40
4.15. Twin needle sewing
Pattern No. Presser foot
001, 004, 005, 009~016,
018, 020, 271~273, 280,
281, 286~288
Standard presser foot (A)
Manual buttonhole presser
foot (I)
By using two needles beautiful decorative stitches
can be sewn.
2.0 mm
B
C
D
2
1
Place the supplementary spool pin.
Thread to the thread guide
A
rst. After that,
thread paths are same up from
B
to
G
.
* When twin needle sewing, make sure to use
thread size smaller than No. 60.
Do not thread
H
for right-hand needle.
Thread to right-hand and left-hand needles sep-
arately.
* Automatic needle threader can not be used.
Thread each needle manually.
* Automatic thread trimmer can not be used in
case of twin needle sewing.
1
2
3
4
E
F
G
3
4
H
■
Changing the needle
Change the needle to the twin needle.
Make sure to use a twin needle with size of 2.0 mm.
* The twin needle is separately available.
1
■
How to thread the
needles
A
Attention
When you want to change
the needle or the presser
foot, be sure to turn the
power OFF or place the
sewing machine under
the lock mode in advance.
To Next Page
Loading...
