80
The set value is conrmed by pressing .
Shortened Lengthened
●
Patterns that can be elongated
271 272 273 274 275 276 277 278 279 280
281 282 283 284 285 286 287 288 289 290
6.3.3. Changing the elongation size
The pattern length can be changed without changing the stitch density of a pattern.
Setting range: “×1” - “×5”
* Initial value has been factory-set to “×1”.
1. Invert the pattern. Then, press .
2. Press .
3. Select the elongation size.
The elongation size will be returned to its initial value
by pressing the blue frame.
The initial value is also restored by pressing
.
Standard
value
To Next Page
Loading...
