94
7.7. Bartacking
Bartacking is used to reinforce the part of the seam that is likely to ravel.
* The length of the bartack is determined by pushing the reverse stitch button, but it will automatically make a
u-turn when it reaches the maximum of 20 stitches.
* If the presser foot cannot be parallel to throat plate, use ller fabric or cardboard.
❷
Example of use)
Trousers
and skirt
Bag
Pocket
2
Place the fabric
❷
under the presser foot.
❶
1
Pass the needle thread through the
presser foot.
❶
10 cm
No. Pattern
034
035
Presser foot
Manual buttonhole presser foot (I)
Leave the machine in Lock mode
To Next Page
Loading...
