JUKI HZL-NX7 - 5. Operation in Detail; Options Overview

48
4.19. Setting the stop position of needle
It is possible to set the position of the needle (upper or lower position) at the time of stopping the sewing machine.
: ON
: OFF
When is pressed, the setting screen is displayed.
● Setting the ON / OFF of the pivot function
: ON
: OFF
● Setting the pivot height
Adjust the pivot height with .
The set value is conrmed by pressing
.
: The sewing machine stops with its needle down
: The sewing machine stops with its needle up
* In the case the “upper stop position” (the sewing machine
stops with its needle up) is selected, the pivot function will
be automatically turned OFF.
4.20. Pivot setting
It is possible to set so that the presser foot goes up while the needle is kept at the lower position at the time of stop-
ping the sewing machine.