52
③
Screen to set the functions while presser foot is up
It is possible to set the operation that can be carried out even when the presser foot is lifted.
The operation you have set can be carried out after the presser foot is automatically lowered even if the presser
foot is in its upper position. (Except for lifting / lowering of the needle).
* All of the initial values have been factory-set to “OFF”.
Press .
The set value is conrmed by pressing .
OFF ON
Start
Foot pedal
Reverse stitch
Lock stitch
Lifting / lowering of
the needle
Thread trimming
To Next Page
Loading...
