JUKI IT-100D - Page 37

– 34 –
■
Sewing common data setting second screen
■
Sewing common data setting rst screen (When limiting procedure of max. zigzag width
limitation is set to left/right)
* When the limiting procedure of max. zigzag width limitation is set to “Center”, the display of max.
zigzag width limitation value becomes that of symmetrical in the center.
0.0
to
10.0
Center
Left
Right
Left/Right
Center
0.0
to
10.0
Limiting
procedure
of max.zigzag
width limitation
Specify-
ing left
position
Specify
-
ing right
position
Reference
of stitch
base line
Conden-
sation cus
-
tom stitch
base line
Mirror
function
setting
Counter
function
Key
lock
Max.zigzag
width limitation
when turning
ON the power
1 pattern
Continuous
Interlocking
Fixed
ON
OFF
Level 1
OFF
Level 2
Display
Non-
display