JUKI IT-100D - Page 79

– 76 –
6) Start of download
■
During communication screen
When all setting procedures have been completed, press
6
in the communication setting screen to start
downloading. When the screen returns to the communication setting screen after display of the during com
-
munication screen, communication is completed.
5) Custom pattern No. setting
■
Communication setting screen
* Screen display when le No. 070 and custom pattern No. 10 are selected.
4) Selection of le No. of the media
■
File No. input screen
Press
3
in the communication setting screen to display the le No. of media input screen. Input the le No.
of media with
!1
. The le No. which has been inputted is displayed in . The No. is determined with
!2
after
inputting the le No.
* As the le No. of the example is 070, input 070 with
!1
in the le input screen (ten key screen) and deter-
mine with
!2
.
Press
4
and
5
in the communication setting screen to set the custom pattern No.
!2
!1
!1
!3