JUKI IT-100D - Page 80

– 77 –
Press
!4
and the deletion is discontinued. Then the screen returns to the le No. input screen. Press
!5
and
the deletion is executed. Then the screen returns to the le No. input screen.
■
Deletion conrmation screen
The deleted le is not restored. Be very careful when executing the deletion.
!4
!5
■
Communication setting screen (upload)
4 5 2
13
6
5
Example of upload
Example) Custom pattern No. 8 is uploaded as the vector form le No. 15 of the media.
1) Open the media cover and insert the USB thumb drive from the insertion opening.
* Panel function does not work with the cover opened.
2) Selection of data
Press
1
in the communication setting screen to display the data selection screen (refer to p. 75).
Determine the data after selecting the parameter data.
3) Selection of communication method
Press
2
in the communication setting screen to display the communication method setting screen (refer
to p. 75).
Press
9
in the communication setting method screen and press
!0
to determine after selecting upload
from the media.
4) Setting of the custom pattern No.
Press
3
and
4
in the communication setting screen (upload) to set the custom pattern No.
5) Selection of the le No. of the media
Press
5
in the communication setting screen (upload) to display the le No. of the media input screen (refer
to p. 76). Input the le No, of the media with
!1
. The inputted le No. is displayed in . After inputting the
le No., determine it with
!2
.
6) Start of the upload
When all setting procedures have been completed, press
6
in the communication setting screen to start
uploading. When the screen returns to the communication setting screen (upload) after display of the dur-
ing communication screen (refer to p. 76), communication is completed.
[How to delete the le of the media]
Press switch
!3
after selecting the No. you desire to delete in the le No. of the media input screen (refer to p.
76), and the screen moves to the deletion conrmation screen.