JUKI PLC-2700 Series - 3 Preparation of the Sewing Machine; How to Set the Model of the Machine Head

– 11 –
1) Call Function Setting No. 95 in refer-
ence to "III-6. Function Setting of
SC-922" in the Instruction Manual
for the SC-922.
󱀄
󱀃󱀂󱀁
3. PREPARATION OF THE SEWING MACHINE
• CP-18
3-1. How to set the model of the machine head
2) The type of machine head can be
selected by pressing switch 󱀃
( switch 󱀄).
Select the type of the machine head
according to the table given below.
3) After selecting the type of machine
head, by pressing switch 󱀁 (
switch 󱀂), the step proceeds
to 94 or 96, and the display automat-
ically changes to the contents of the
setting corresponding with the type
of machine head.
󱀄
󱀃󱀂󱀁
󱀄
󱀃󱀂󱀁
Type Marking
PLC-2710-7
,
2760-7 P27d
PLC-2710, 2760, 2765 PL27
PLC-2760L PL2L