– 4 –
2. INSTALLATION
1) Carry the sewing machine with two persons.
In the case of the sewing machine with a thread
trimmer, loosen post cover mounting screws
(three locations) to remove them. Remove post
cover . Then, carry the sewing machine by
holding motor cover .
2) Do not put protruding articles such as the screw-
driver and the like at the location where the sewing
machine is placed.
3) Attaching the hinge seats and the support rubbers
of the machine head
Fix hinge seat and machine head support
rubber which are supplied with the unit on the
table with nails as illustrated in the gure.
4) Attaching the oil pan
Fix the oil pan supplied with the machine on
the table by tightening eight wood screws.
Do not hold the handwheel.
Operator’s
side
Align
Align
2-1.
Installation of the sewing machine
To Next Page
Loading...
